Clean surface cleanliness, uniform texture, does not allow any entrained impurities, 57mm diameter rod cross section without obvious color difference / the board clean, uniform texture, does not allow any entrained metal impurities, is less than or equal to 1 mm impurities shall not exceed 2
The tensile strength is more than 27/25.5 (Mpa)
The fracture growth rate (%) = 250
Volume density (g/L) 500 + 100
The average particle size (m) 180 + 80
Moisture content (%) = 0.04
Melting point (327 + 5)
Standard relative density 2.130~2.160
The thermal instability index is less than or equal to 20
Electric strength (KV/mm) = 60/0
Test method according to HG/T3208-1999 requirements
Processing method molding

Packaging 1.PTFE in double plastic bag outside hard drum packaging; packaging barrels are accompanied by labels, certificate, marked with a trademark, implementation of standards, varieties and grades, grade, batch number, net weight, date of packaging, inspector, packaging.
2.PTFE should be stored in a clean, dry warehouse, to prevent dust, water and other impurities mixed.
3 the goods are transported by non dangerous goods. In the course of transportation, we should avoid the heat, moisture, freeze or severe vibration, and excessive turbulence and extrusion.

Technical indicators (002-2003 Q/DYG)

Suitable for processing thin film, plate, rod, washer, bearing products and pre sintering material, etc..